Rain water treatment plants and equipment



IT EN RU




Telemantova Euromec Tv Report



REMOTE ACCESS EUROMEC PLANTS
Enter your login and password
Login: 
Password:  
 



Rain water diverters, Separators for service areas, parking lots, garages, auto wreckers, Separators for enclosed automotive workshops, By-pass treatment systems, Treatment using storage basins, Continuous treatment for large surface areas, Automatic self-cleaning storage basins, Rain water treatment plants and equipment, industrial waste water, purification, groundwater protection, septic tanks, biological oxidation


A A A
WATER PURIFICATION ENGINEERING
Rain water treatment plants and equipment
Rain water treatment plants for large, medium and small surface areas, standardized according to Regional Technical Specifications and conforming to European Norms.
Oil extracting systems, rainwater treatment and flow regulation into sewer systems.
Automatic flywheel cleaning systems.

EURO MEC’s prefabricated separators are dimensioned according to the European Norm EN 858-1 and conform to the parameters set by legislation 152 dated 03/04/2006 regarding the discharge of floating substances, settleable solids and hydrocarbons into public sewers or surface water.




industrial waste water, purification, groundwater protection, septic tanks, biological oxidation

Rain water diverters
rain water treatment plants and equipment

EURO MEC rain water diverters SSP series are used as established by L. R. n.26 of the Lombardy Region on 12.12.03 and are necessary to control inlet water sent to the drainage system. This allows to dispose them through ground natural infiltration without polluting ground water, separating rain water sent to the drainage system or to the treatment plant.
Separators for service areas, parking lots, garages, auto wreckers
Hydrocarbon separation plants

EURO MEC’s prefabricated separators, series SO/P and SA/P, are used to clarify water coming from large service area lots such as car parks and wrecking yards where the principal water pollutants derive from car bodies and include mineral oils, sand and organic matter.
Separators for enclosed automotive workshops
hyfrocarbon separation plants

EURO MEC’s prefabricated separators, series SO/C, SA/C and DISOPAC, are used to clarify water resulting from the washing of enclosed garages and workshops where the principal water pollutants derive from car bodies and include mineral oils, sand and organic matter.
By-pass treatment systems
rainwater treatment plants (medium surfaces 1000 to 4000 square meters)

EURO MEC’s rain water treatment system, series IPP/B, is used for medium sized surface areas and facilitates the partial treatment of rain water through the use of an initial catchment basin then sand, oil and hydrocarbon separation units with or without a coalescence filter.
Treatment using storage basins
EURO MEC’s rain water treatment system, series IPP/A, is used for medium and large sized surface areas where it diverts and holds rain water in retention basins to be later pumped, with a restricted flow, into public drainage systems within approximately 48 hours according to relevant norms.
Continuous treatment for large surface areas
rainwater treatment plants

areas are used to service large surface areas and are dimensioned and structured according to what’s prescribed in L.R. n. 26 of the Lombardy region, dated 12/12/2003.
Automatic self-cleaning storage basins
EURO MEC’s rain water and retention basins are generally constructed as rectangular or circular tanks with inclined bases which accommodate settleable solids and floating greasy matter.




previous: Prefabricated waste water depuration plants
next: Primary water treatment plants, drinking water and desalination plants


Internet partner: Sigla.com
[www.sigla.com]