Parallelepipeds monoblock tanks OXI/P Purification and total oxidation plants



IT EN RU




Telemantova Euromec Tv Report



REMOTE ACCESS EUROMEC PLANTS
Enter your login and password
Login: 
Password:  
 



Parallelepipeds monoblock tanks OXI/P Purification and total oxidation plants, Prefabricated waste water depuration plants, large size, purification, septic tanks, biological oxidation


A A A
WATER PURIFICATION ENGINEERING > PREFABRICATED WASTE WATER DEPURATION PLANTS
Purification and total oxidation plants
Features | Monoblock OXI/AM  | Parallelepipeds monoblock tanks OXI/P  | Ring plants OXI/A  | Circular tanks OXI/M  | SBR technology OXI/SBR 
Monobloc parallelepiped total oxidation plants 30 to 200 pe | total oxidation plants from 250 to 800
Monobloc parallelepiped total oxidation plants 30 to 200 pe | total oxidation plants from 250 to 800

MONOBLOC PARALLELEPIPED TOTAL OXIDATION PLANTS FROM 30 TO 200 AND 250 TO 800 EQUIVALENT POPULATION
Monobloc parallelepiped prefabricated plants type EURO MEC OXI/P series for residential areas from 30 to 200 and 250 to 800 equivalent population are dimensioned in order to guarantee the acceptance limits to the discharge foreseen by the Directive 91/271/CEE for discharge in superficial water, principally composed of a parallelepiped tank horizontal axe divided inside into two sections: an oxidation section equipped with self-polishing membrane air diffusers and a final sedimentation section with automatic sludge recycling.

The supply includes the blower type side channels for the production of compressed air and the general command and protection electric panel.
The tanks of the monobloc prefabricated tanks type EURO MEC OXI/P series are composed of monolithic tanks made of reinforced concrete to guarantee any leak absence and any absence of ground infiltrations and can be installed even in presence of ground water.

HOW TOTAL OXIDATION PLANTS OXI/P SERIES WORK
Monobloc parallelepiped prefabricated plants type EURO MEC OXI/P series are divided into the following sections: one for biological oxidation, where by means of aeration through air insufflation, happens the complete reduction of sewage organic substance; one of sedimentation, where sludge separation is obtained, which settle on the bottom, and skimming clarified water is send to the discharge.

Active sludge, collected from the bottom of the sedimentation section, is recycled in continuous by means of a pneumatic ejector to the oxidation, respect to overflow sludge, coming from biological increase, which is periodically extracted.

With the use of timers, that command the on/off of the blower, the functioning of parallepiped monobloc prefabricated plants type EURO MEC OXI/P series can be fully automised.

USED MATERIALS
Tanks : highly resistant reinforced vibrated concrete
By request : painted steel fiberglass
Shafts : concrete (if requested class D 400 cast iron)
Piping : galvanised steel and polyethylene
By request : stainless steel AISI 304

SPECIFICATION
“Supply of prefabricated total oxidation depuration plant made of reinforced concrete type EURO MEC OXI/P series composed of a monolithic parallelepiped basin made of reinforced concrete horizontal axe divided inside into a biological oxidation section and a final sludge sedimentation section, complete with sewage inlet and outlet connection pipes, inspection shafts made of concrete, self-polishing membrane air diffusers, command and protection.

   OXI/P-1 catalog pdf format (ita-eng)
   OXI/P-2 catalog pdf format (ita-eng)


large size, purification, septic tanks, biological oxidation




previous: Oil & fat separators for kitchens
next: Biodisc purification plants


Internet partner: Sigla.com
[www.sigla.com]