Cylindrical units Lifting station



IT EN RU




Telemantova Euromec Tv Report



REMOTE ACCESS EUROMEC PLANTS
Enter your login and password
Login: 
Password:  
 



Cylindrical units Lifting station, Prefabricated waste water depuration plants, civil waste water, industrial waste water


A A A
WATER PURIFICATION ENGINEERING > PREFABRICATED WASTE WATER DEPURATION PLANTS
Lifting station
Features | Cylindrical units  | Parallelepiped units  | Polyethylene units 
Cylindrical monobloc lifting stations
Cylindrical monobloc lifting stations

Cylindrical monobloc lifting stations type EURO MEC SSL/C series, used for the accumulation and the lifting of civil and industrial sewage water, are composed of a monolithic tank made of reinforced concrete highly resistant, to guarantee total leak absence and absence of ground infiltrations.

Cylindrical monobloc lifting stations type EURO MEC SSL/C series are already supplied with inside one or more submersible pumps with pipes, level regulators and their devices for the correct functioning; the standard model also includes inspection manholes made of hot galvanised steel.
In order to install and start the lifting stations, to position even in presence of ground water in the excavation, the only operations to do are monobloc earthing, pipe connection, command electric panel connection.

HOW CYLINDRICAL MONOBLOC LIFTING STATIONS SSL/C SERIES WORK
Cylindrical monobloc lifting stations type EURO MEC SSL/C series are supplied with submersible pumps proportioned to the sewage flow rate to lift, commanded by floating level regulators with automatic functioning. For a good functioning it is important to calculate the effective volume obtained according to the formula written hereafter, taking care for the starts per hour permitted to the electropumps.
For guidance for an optimal functioning it is suggested that the lifting station volume permits to every installed power from eight to twelve starts per hour.
By request for the protection of the lifting pumps, a basket screen sliding on guides complete with extraction chain can be supplied.

USED MATERIALS
Tanks : highly resistant reinforced vibrated concrete
By request : painted steel, reinforced fiberglass
Shafts : concrete
By request : hot galvanised steel, stainless steel AISI 304, class D 400 cast iron
Piping : galvanised steel
By request : stainless steel AISI 304

SPECIFICATION
“Supply of a monobloc lifting station type EURO MEC SSL/C series, composed of a cylindrical monolithic tank vertical axe, made of highly resistant reinforced concrete, complete with inspection manholes made of hot galvanised steel sheet, one or two submersible electropumps each with automatic coupling system and extraction chain, delivery pipes with terminal flange equipped with sluice valve and non-return valve of the same diameter, hot galvanised guide pipes of the pumps with brackets, automatic floating switch level with support, complete with electric panel constructed according to the CEI norms, in water-proof case type IP55, with wiring and assembly inside of all devices necessary for the automatic alternated working of the electropumps.”

   SSL/C catalog pdf format (ita-eng)


civil waste water, industrial waste water




previous: Depuration plants for car washes with bio-oxidation process
next: Chemical-physical plants


Internet partner: Sigla.com
[www.sigla.com]