Separators for service areas, parking lots, garages, auto wreckers, Hydrocarbon separation plants



IT EN RU




Telemantova Euromec Tv Report



REMOTE ACCESS EUROMEC PLANTS
Enter your login and password
Login: 
Password:  
 



Separators for service areas, parking lots, garages, auto wreckers, Hydrocarbon separation plants, Rain water treatment plants and equipment, EURO MEC’s prefabricated separators, series SO/P and SA/P, are used to clarify water coming from large service area lots such as car parks and wrecking yards where the principal water pollutants derive from car bodies and include mineral oils, sand and organic matter. standard plants, large size, groundwater protection


A A A
WATER PURIFICATION ENGINEERING > RAIN WATER TREATMENT PLANTS AND EQUIPMENT
Separators for service areas, parking lots, garages, auto wreckers
 
Hydrocarbon separation plants


monobloc prefabricated separators SO/P | SA/P | SA/PU
monobloc prefabricated separators SO/P | SA/P | SA/PU
EURO MEC’s prefabricated separators, series SO/P and SA/P, are used to clarify water coming from large service area lots such as car parks and wrecking yards where the principal water pollutants derive from car bodies and include mineral oils, sand and organic matter.

Facilitating this process, EURO MEC’s production program includes the following:
  • Monobloc prefabricated separators in reinforced concrete (series SO/P)
  • Monobloc prefabricated separators in reinforced concrete modular rings (series SA/P)
  • Monobloc prefabricated separators in reinforced concrete modular circular sections (series SA/PU)


WHAT ARE MONOBLOC SEPARATORS FOR CAR STATIONS, CAR PARKINGS, CAR DEMOLITION SITES, INDOOR PARKING GARAGES SO/P SERIES
Monobloc prefabricated separators type EURO MEC SO/P series are dimensioned according to the DIN 1999 regulations and therefore ensure the compliance with the acceptability parameters with the Directive 91/271/CEE regarding the discharge in public sewers or superficial water of fluctuating substances and sedimentable solids.

These separators are used to depurate water coming from car stations, car parkings and/or car demolition sites, which are mainly polluted by accidental spilling of parked cars, mineral oils, sand and mud. The monobloc prefabricated separators type EURO MEC SO/P series are composed of a monobloc rectangular tank with a flat bottom made of highly resistant reinforced concrete guaranteeing a total leak absence and the absence of ground infiltrations and can therefore be installed also in presence of ground water into the excavation.

The tank is separated into two sections: sand separation and oil separation. The cover is carriageable and complete with concrete inspection manholes.
Monobloc prefabricated separators type EURO MEC SO/P series are used for the depuration of sewage water before their discharge into superficial water (Directive 91/271/CEE) and are complete with a coalescence filter separating also the suspended oil microparticles.
All the SO/P models are also equipped with a floating obstructor in order to prevent oil spilling when the collection chamber is completely full.

HOW MONOBLOC SEPARATORS FOR CAR STATIONS, CAR PARKINGS, CAR DEMOLITION SITES, INDOOR PARKING GARAGES SO/P SERIES WORK
The parkings subject to meteoric precipitations have to be equipped to carry such precipitations into a single point in which the separator will be located.
The water starts its treatment as soon as it reaches the separator and will stay into the sand separation section or sludge separator for an optimal separation of the sedimentable substances. This pretreated water is subsequently sent to the oil separator in which the light substances in the water undergo a fluctuation treatment and then collected into a chamber as soon as they reach the surface.

The discharge water which has to comply with the acceptance limits stated on the Directive 91/271/CEE for the discharge into superficial water through the use of a coalescence filter. Thanks to this filter the micro- particles adhere to a particular coalescent material (absorption effect), join up (coalescence effect) favouring their fluctuation into surface. The separator discharge is automatically closed by a floating shutter to prevent oil spilling when it reaches a certain level in the collection chamber.

USED MATERIALS
Tanks : highly resistant vibrated reinforced concrete
Shafts : concrete
By request : hot galvanized steel, AISI 304 stainless steel, D400 cast iron
Internal carpentry : AISI 304 stainless steel

SPECIFICATION
“Supply of a monobloc separator type EURO MEC SO/P series, dimensioned according to the DIN 1999 prescriptions, monobloc parallelepiped prefabricated tank for the treatment of water coming from car stations, car parkings, car demolition sites, indoor parking garages made of highly resistant reinforced concrete divided into two sections, one for sand separation and one for oil separation, complete with stainless steel deflectors, coalescence filter, discharge device with floating obstructor with carriageable cover apt for heavy loads complete with inspection manholes.”

WHAT MINERAL OILS SEPARATORS FOR CAR STATIONS, CAR PARKINGS, CAR DEMOLITION SITES AND INDOOR PARKING GARAGES SA/P SERIES ARE
Prefabricated mineral oils separators type EURO MEC SA/P series are dimensioned according to the DIN 1999 regulations in compliance with the acceptance parameters of the Directive 91/271/CEE regarding the discharge in public sewers or superficial water of fluctuating substances and sedimentable solids.

They are used to depurate the water coming from car stations, car parkings and/or demolition sites, which are mainly polluted by accidental losses from parked cars with presence of mineral oils, sand and mud.
Prefabricated mineral oils separators type EURO MEC SA/P series are composed of two highly resistant reinforced concrete circular tanks with flat bottom.
The installation has two distinct basins: one for the sand separation and one for the oil separation section.

The cover is carriageable and complete with D400 cast iron inspection manholes.
Prefabricated mineral oils separators type EURO MEC SA/P series used for the treatment of sewage water discharge into surface water (Directive 91/271/CEE) are completed with a coalescence filter separating also the suspended oil microparticles.
Prefabricated mineral oils separators type EURO MEC SA/P series are equipped also with a floating obstructor in order to avoid oil spilling when the collection chamber is completely full.

USED MATERIALS
Tanks : highly resistant vibrated reinforced concrete
Shafts : D400 cast iron
Internal carpentry : AISI 304 stainless steel

SPECIFICATION
“Supply of a separator type EURO MEC SA/P series dimensioned according to the DIN 1999 prescriptions, prefabricated for the treatment of water coming from car stations, parkings and/or car demolition sites, made of highly resistant reinforced concrete, divided into two sections: sand separation and oil separation, complete with stainless steel deflectors, coalescence filter, floating obstructor, carriageable cover for heavy loads and D400 cast iron inspection manholes.”

   2012 SO/P catalog pdf format (ita)
   2012 SA/P catalog pdf format (ita)
   2012 SA/PU catalog pdf format (ita)


standard plants, large size, groundwater protection



previous: Rain water diverters
next: Separators for enclosed automotive workshops


Internet partner: Sigla.com
[www.sigla.com]